A STAR brand

Jason Smith |

What to Budget for Your First Exhibit (and What Gets Missed)

What to Budget for Your First Exhibit (and What Gets Missed)

What to Budget for Your First Exhibit (and What Gets Missed)

What to Budget for Your First Exhibit (and What Gets Missed)

A first exhibit budget should cover far more than the booth and the floor space. Plan for roughly three to four times the cost of the space itself, because show services, shipping, material handling, labor, travel and promotion make up most of the total. First-time exhibitors who build those line items into the budget from day one avoid paying on-site rates for services they could have ordered in advance.

The gap between the booth price and the total cost is where first-time exhibitors go over budget. In EXHIBITOR magazine's most recent survey of nearly 200 event marketers, booth space accounted for 23 percent of the average trade show budget, show services for 18 percent and exhibit design and construction for 16 percent, with shipping and travel at 11 percent each. The space and the booth together represent less than 40 percent of what a typical exhibitor spends.

Most of the remaining costs are set by the show, and most come with published deadlines. That makes them the most controllable part of a first exhibit budget. Services ordered before the discount deadline cost less than the same services ordered on the show floor.

Key takeaways

  • A first exhibit budget typically runs three to four times the cost of the booth space.
  • Booth space and the exhibit itself account for less than 40 percent of the average trade show budget.
  • Material handling, also called drayage, is billed separately from shipping and is the cost first-time exhibitors most often overlook.
  • Renting a booth for a first show keeps upfront spending low and removes storage costs between events.

How much does a first trade show exhibit cost?

The total cost of a first exhibit depends mostly on booth size and show city, but the space contract is the most reliable starting point. A long-standing industry guideline multiplies floor space cost by three for a small exhibit without much setup labor, drayage, or show services, and uses a higher multiplier for larger exhibits with significant labor and utility needs. EXHIBITOR's current data points in the same direction: if booth space is 23 percent of the average budget, the full budget comes to a little over four times the space cost.

Use this four-step estimate:

  1. Start with the space contract price.
  2. Multiply by three for a lightweight, self-installed booth, or by four for a booth that ships as crated freight or needs show labor.
  3. Add a contingency of 10 to 15 percent.
  4. Subtract what you will not need (for example, travel if the show is local) and add what you know you will need (for example, a lead retrieval rental).

A first-time exhibitor with a $5,000 space contract, for example, should plan for a total between $15,000 and $20,000 before contingency. The booth itself can be a modest share of that number; Featherlite's catalog includes portable displays in an under-$5,000 price tier, and 10x10 displays are the most common starting size. For help choosing a footprint, see the trade show booth size guide.

What does a typical trade show budget include?

A trade show budget includes every cost tied to the event, not only the cost of the booth. The table below shows how experienced exhibitors allocate their spend, based on EXHIBITOR magazine's 2025 survey.

Budget category Share of average budget What it covers First-timer watch-out
Booth space 23% Floor space contract Corner and island spaces cost more per square foot
Show services 18% Electrical, internet, furniture, carpet, cleaning, material handling Prices rise after the discount deadline
Exhibit design and construction 16% Booth hardware, structure, refurbishing A lighter booth lowers freight and handling costs at every show
Shipping 11% Carrier freight to and from the show Return freight needs its own booking
Travel and lodging 11% Staff airfare, hotels, meals Often tracked outside the exhibit budget
Marketing promotions 8% Pre-show outreach, giveaways, sponsorships Easy to add late and overspend
Graphic design and production 6% Artwork, printing, reprints Outdated messaging means reprints before the next show
Talent 3% Paid booth staff, presenters Most first-timers staff internally
Measurement 2% Lead retrieval, analytics Badge scanners are usually a separate rental
Other 2% Uniforms, miscellaneous Small items add up across a team

Survey source: EXHIBITOR magazine, "Budget Breakdown: How the Exhibiting Dollar Is Spent"

These figures reflect established exhibit programs. A first exhibit in a 10x10 space usually spends a larger share on the space and a smaller share on the exhibit, since portable booths cost less to build and move.

Which trade show costs do first-time exhibitors miss?

The costs first-time exhibitors miss are the ones that arrive on a separate invoice after the booth is paid for.

  • Material handling (drayage). Drayage is the show contractor's charge for moving freight from the dock or advance warehouse to the exhibit space and back out at the close of the show. It is billed by weight with per-shipment minimums, and it is separate from what the carrier charges. For the full picture, read Freight and drayage demystified.
  • Show services ordered late. Electrical, internet, furniture and cleaning all cost less when ordered before the deadlines listed in the exhibitor services manual.
  • Install and dismantle labor. Electrical hookups, hanging signs, forklift work and anything above a set height are typically reserved for show labor, and those rules vary city by city. See how to cut install and dismantle costs.
  • Outbound freight. Freight without a carrier checked in by the contractor's deadline becomes forced freight, rerouted by the contractor at prevailing rates.
  • Travel outside the budget. EXHIBITOR notes that travel's 11 percent share may understate actual costs, because many companies record travel outside the exhibit budget.
  • Storage and repairs. An owned booth needs a place to live between shows and a check before it ships again. The pre-ship booth inspection checklist covers what to look for.
  • Lead retrieval. Badge scanners and lead apps are usually rented from the show separately.
  • Contingency. A 10 to 15 percent reserve covers on-site surprises without pulling money from follow-up.

Drayage is the trade show cost first-time exhibitors are least likely to anticipate, because exhibitors pay to ship freight to the city and then pay again to move it from the dock to the booth.

Should a first-time exhibitor rent or buy a booth?

Most first-time exhibitors are better served by renting, particularly when the calendar holds only one or two shows. Buying makes more sense once a company has committed to several shows a year and can use the same booth at each one.

Decision factor Rent Buy
Shows in the next 12 months One or two Three or more
Upfront cost Lower Higher, spread across shows
Storage between shows Not needed Required
Branding Custom graphics on rental hardware Custom graphics and owned hardware
Size flexibility Choose a size per show Modular systems reconfigure between sizes
Best fit Testing a new show or market An established multi-show program

A rental does not have to look like a rental. Custom graphics and lighting make a rental exhibit look fully custom. Browse Featherlite rental booths, compare options in Rent or buy? How to select trade show services strategically, or download The true cost of exhibit ownership e-book.

How can a first-time exhibitor keep the budget on track?

A first exhibit stays on budget when every cost has an owner and a deadline before the space contract is signed.

  1. Read the exhibitor services manual the day the space is confirmed, and put every discount deadline on the team calendar.
  2. Price freight and material handling before choosing a booth. A lighter booth costs less to move at every show it attends.
  3. Confirm the setup rules for your space size and booth height, so you know whether you need show labor.
  4. Book inbound and outbound carriers together and give the driver the check-in deadline in writing.
  5. Track every line item in one budget sheet, including travel, so nothing lives in a separate department's budget.
  6. Hold back 10 to 15 percent for on-site changes.
  7. Measure cost per lead after the show, so the second budget starts from data instead of estimates.

For the full countdown, see 7 mistakes first-time exhibitors make on the show floor and The ultimate trade show checklist. To go further on savings, read smarter logistics strategies and smarter on-site execution strategies.

How have Featherlite clients controlled costs early in their trade show programs?

SRS Distribution: renting first, buying once the program proved itself

SRS Distribution chose to rent its booth while working within a newer division, citing cost constraints and the need for flexibility. STAR Exhibits supplied a Featherlite Sync modular system, starting with 10x10 and 10x20 rentals. After using the same system at GCSAA, FRSA and Intersolar, SRS moved from rental to ownership, reusing much of the existing hardware, and now runs three or more shows a year on one system, which lowers exhibit spend per event. Read the SRS Distribution story.

CEDUR: an island presence without an I&D crew

CEDUR came to Featherlite as a new client with one month between signing and show day. Featherlite designed a 20x20 Medallion 2 island that CEDUR's own staff set up, which eliminated install and dismantle labor and reduced freight and material handling costs compared with a traditional island build. CEDUR's marketing director, Jason Hyland, credited Featherlite with "meeting our expectations, meeting our budget." Read the CEDUR story or explore the MDB2 4005 island.

See more examples on the Featherlite work page.

Plan your first exhibit with Featherlite

Featherlite Exhibits, a STAR Exhibits brand, has built portable and modular trade show booths for more than 50 years, and its team supports first-time exhibitors with design, shipping, storage, and installation. Create a quote in about five minutes, or contact us to talk through your first show budget.

FAQs for first-time exhibitors

How much should a small business budget for its first trade show?

A small business should budget about three to four times the cost of its booth space for a first trade show. A lightweight, self-installed 10x10 booth sits at the low end of that range. A booth that ships as crated freight or requires show labor sits at the high end. Add a 10 to 15 percent contingency, and include staff travel in the same budget.

What is the biggest hidden cost of exhibiting at a trade show?

Material handling, also called drayage, is the biggest hidden cost for most first-time exhibitors. It is the show contractor's fee for moving freight from the dock or advance warehouse to the booth and back. Drayage is billed by weight with per-shipment minimums, separate from the carrier's shipping charge, so lighter booths and consolidated shipments reduce it.

Is it cheaper to rent or buy a trade show booth for a first show?

Renting is usually cheaper for a first show, because the exhibitor avoids the upfront purchase and the cost of storing the booth between events. Buying becomes more cost-effective when a company plans to exhibit three or more shows a year with the same booth. Many exhibitors rent first and buy once their show calendar is set.

How far in advance should a first-time exhibitor start budgeting?

A first-time exhibitor should start budgeting at least 90 days before the show, ideally on the day the space is booked. That window leaves time to read the exhibitor services manual, order services before discount deadlines, book freight in both directions and confirm whether the show requires labor for setup. Starting later usually means paying on-site rates.

Ready to get started?

Have questions or need a custom exhibit solution? Let us help you create a display that perfectly fits your brand's needs.

Toll Free 1.800.229.5533